Share on StockTwits

LIGHTNING RELEASES: 

 Vancouver, BC (4/15/2014) - Larry W. Reaugh, President and Chief Executive Officer of American Manganese Inc. (“American Manganese” or the “Company”), (TSX.V:  AMY; Pink Sheets:  AMYZF; Frankfurt:  2AM), is pleased to report that the Company has acquired by staking the Koot mineral claims:  A high grade silica (SiO2) prospect. A research team at the University of Southern California Viterbi School of Engineering recently published their research results on silicon anodes in Nano Letters, and as reported in the university’s press release (March 31, 2014):   “Researchers  at the University of Southern California Viterbi School of Engineering of have improved the performance and capacity of lithium batteries by developing better-performing, cheaper materials for use in anodes and cathodes (positive and negative electrodes, respectively).  Traditionally, lithium-ion batteries contain a graphite anode, but silicon has recently emerged as a promising anode substitute because it is the second most abundant element on earth and has a theoretical capacity of 3600 milliamp hours per gram (mAh/g), almost 10 times the capacity of graphite.”  Anodes made from ball-milled and stain-etched metallurgical grade silicon nano-powder is an emerging technology that could lead to cheaper and more efficient lithium batteries.

Koot Project:

Mr. Reaugh states “The acquisition of this silica project follows the Company’s   philosophy of finding superior value in non-mainstream mineral projects in politically stable and mining-friendly jurisdictions through the application of state-of-the-art mineral science.” 

The Koot Project is located about 4 kilometers east-southeast  of Canal Flats, British Columbia, Canada in the Golden Mining Division, about 2.5 kilometers east of Highway 95 and 3.5 kilometers east of the Canadian Pacific Rail line.  The mineral claims are underlain by the Lower Cambrian Cranbrook Formation.  The quartzite occurrence strikes north-south for a length of approximately 400 meters (1312 feet). The property was owned and explored by Cominco in the 1980’s where 8 diamond drill holes returned high grade SiO2 values over intervals ranging from 16.54 meters (54 feet) to 79.8 meters (262 feet) thick.  Thirty-four 6.1 meter (20 foot) composites returned SiO2 values > 99% in 14 samples; between 99% and 98% in 18 samples; and between 98% and 97% in 2 samples.  The drill holes are sited on 2 knolls, and the over-burden thickness range from 1.22 meters (4 feet) to 4.44 meters (14.5 feet),  averaging 2.87 meters (8.8 feet). 

Processing to convert high grade silica into a saleable product includes:  Quarrying, staged crushing, and thermal reduction of the silica with carbon to produce high purity metallurgical grade silicon (Si).  

Mr. Reaugh states:  “The Company remains committed to achieving production of high purity Chemical Manganese Dioxide (CMD) and/or Electrolytic Manganese Dioxide (EMD) from its Artillery Peak Manganese project situated in Arizona.  The potential of being a secure supplier of materials for both the cathode (CMD or EMD) and the anode (Si) is very advantageous for the Company. 

According to Tesla’s published timeline, the decision on the location its proposed lithium ion battery Gigafactory should be announced in the next few weeks.  With the proposed Tesla Gigafactory, and the recent General Motors announcement to invest US $450 million in its Chevy Volt EV and battery manufacturing facilities, I am confident in the growing consumer demand for electric vehicles.”

All of the historical estimates mentioned above may not be compliant with National Instrument 43-101 and should not be relied upon.  A qualified person has not done sufficient work to classify the historical estimates as current mineral resources or mineral reserves and the Company is not treating the historical estimates as current mineral resources or mineral reserves.

About American Manganese Inc.

American Manganese Inc. is a diversified specialty and critical metal Company focusing on potentially becoming the lowest cost producer of electrolytic manganese products from its Arizona Manganese Project.

This release has been reviewed by Michael MacLeod, P. Eng., a qualified person pursuant to National Instrument 43-101.

On behalf of Management

AMERICAN MANGANESE INC.

Larry W. Reaugh
President and Chief Executive Officer

Information Contacts:

Larry W. Reaugh
President and Chief Executive Officer
604-531-9639

Email: lreaugh@amymn.com

www.americanmanganeseinc.com

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. This news release may contain “forward-looking statements”, which are statements about the future based on current expectations or beliefs. For this purpose, statements of historical fact may be deemed to be forward-looking statements. Forward-looking statements by their nature involve risks and uncertainties, and there can be no assurance that such statements will prove to be accurate or true. Investors should not place undue reliance on forward-looking statements. The Company does not undertake any obligation to update forward-looking statements except as required by law.